Solar Panels For Homes

For homeowners around the world, the idea of reducing their power bills and helping the planet is pretty enticing. The problem now as it always has been is money. Solar can be expensive, and even with government rebates the cost can scare some people away. If you are a do-it-yourselfer you’ve probably wondered if you can tackle a solar project. Let’s walk through a typical design and installation process and see if its right for you and your home.

Location Selection Basics

Well you’re probably smart enough to figure out that you’ll need A) a sunny region and B) a sunny place to install the system. The more sun you get, the quicker your systems will pay for itself, its that simple. There are some nice tools to determine where exactly you should put the system. The solar pathfinder is one of easiest and most affordable ways to find the best location for panels. This ingenious device works by showing you a reflection of the sky and the sun’s path for all four seasons in your area. Using this you can see exactly what will shade your panels throughout the course of the year.

You also want solar panels installed fairly close to your home and power meter. Since photovoltaic power is DC, the wire that carries it grows larger and more expensive the further away it is from the inverter, meter, and power center of the house. You’ll want a place close to the house but out of way of children and their errant soccer balls. Also if you are planning on installing the system on your roof, its worth it to do a roof inspection. No sense in installing a system if it will have to be removed in a couple years to replace the shingles.

Determining Angle and Azimuth

Generally speaking the closer you can get your panels to facing due south (or 180 degrees azimuth) the better. If you live in an urban area and are not sure which way south is exactly, use Google Maps to look up your address and click on the satellite image. You might be surprised to see that roof you thought was south facing is actually southeast facing!

The angle from horizontal is very important too. The angle should be equal to your latitude since this will mean the panels will be perpendicular to the sun for greatest amount of time. If you’re not sure what latitude you’re at, check out this latitude map of the US. So if you live in Portland, with a latitude of approximately 45 degrees, your panels should be set at an angle of 45 degrees from horizontal. IF your roof angle is within 10 degrees of you latitude you can mount the panels easily, if not you may have to consider a rack system that will tilt the panels.

Space Considerations

The rule of 1/10 is easy to remember for solar power. You’ll need 1/10 of a square foot for every watt you install. So if you want to install 2,000 watts, you will need about 200 square feet of space for panels, racking, wiring, and a little space to work around them. This will vary slightly by the type of installation and panels you get but this will serve as a guide for the time being. You’ll also need about a 4′x4′ area near the meter for the inverter, breakers, and power components. Keep in mind also that your power company may want to install a new meter or even an additional meter for the system.

Contacting the Utility and Building Department

Its always a good idea to talk to your power company about installing a system. You will probably need an interconnection agreement, an inspection, and a rate schedule if you are planning to sell back power. They’ll also want some information about the panels and inverter you are installing. Also, ask about additional rebates and an up to date cost per kilowatt-hour that you are paying.

You should also place a call to the local building department and ask about permits. This may seem like a pain, but really it protects you from hassles in the end. Eventually they’ll probably find out about your systems anyway and you may have to pay a fine for not getting a permit. The vast majority of inspectors will allow you to install a system on your own home, they may just require you to have a master electrician sign off on the installation.

Estimate Your Production

You’ll want to decide just what the system is going to produce over the course of a year. The National Renewable Energy Lab has a cool tool that will allow you to do this. With the information you’ve determined in the steps above, click on this solar map. Then find your area, and double click on it. You should see a data window open up with a link at the bottom that says ‘Send to PV Watts’. Click on that link, then enter the information we determined in the first steps for angle, azimuth, and cost of power. Also enter the size of the system you want in kilowatts. Click on the calculate button and you’ll see the production per month for a year. This can help you determine payback.

Finally: Determine a Budget

Possibly the most important part is deciding how much you can spend on a system. Most complete solar power kits cost between $4 and $6 per watt, depending on the size and racking system. Be sure to take into account all state, local, and utility incentive programs, which can be found at DSIREUSA.ORG. You may even find a supplier that will take the rebates off the price of the system, then the manufacturer goes after the rebate. Sharp has a program like this.

Next we’ll determine what skills and tools are needed, and start planning the installation.

Kriss Bergethon is a writer and solar professional from Colorado. For more information visit solar panel kits.

For more of useful articles on solar power, please visit Solar Power, supplier of solar power panels, solar power kits, and more.

Jeremy Levin Design on TV – part 4 – Renovation Nation

Tripp Lite PV150 PV 150W 12V DC to AC Portable Inverter with DC Auto Power Outlet $22.91 300 watts peak150 watts continuous power Low-battery alarm with auto-shut-off prevents deep battery dischargeLightweight design with all-metal housingClean quiet operation1 AC outlets 3 3/4"W x 1 3/4"H x 5 3/4"DPV-375: 4 1/4"W x 2"H x 7"DPV-600 6 1/4W x 4"H x 10 1/4"DIncludes DC cigarette lighter plug...

Tripp Lite PV3000HF PV 3000W 12V DC to AC Permanent Mount Inverter $663.00 Harness your vehicle''s battery to efficiently power office equipment on the road or power tools at a work site. Continuously supplies up to 3000 watts of 120V AC power to 4 AC outlets from any 12V battery or automotive DC source. Includes a PV remote and 25 feet of cable. Super-compact, lightweight metal case design is among the smallest, most rugged inverters available at this power level....

Ensupra Grid Tie Inverter 500W,New Design,1Yr.Wrnty,25-46VDC to 110V/120VAC,Power from Solar Panel, Wind Generator, Hydro or Storage Battery,1 Year Full Warranty $229.00 Ensupra grid tie power inverter can obtain the solar energy from solar panel, and can tie to the grid through its output cable with no extra equipment. The installation is Do-It-Your Self (DIY).When the sun shines, the PV panel will produces DC voltage, and the grid tie inverter will change the DC voltage to AC voltage and puts out power to the home grid, saving electricity. INSTALLATION: 1, Conne...

A Complete Guide to the Installation of Off-Grid PV Solar Power Systems $49.25 This DVD set is a 4 hour, 16 chapter comprehensive course on the installation of Off-Grid photovoltaic solar power electric systems. It is designed to take the complete beginner to full competency. The course is taught by Bob Nagy who is the teacher in over 40 videos on high-tech subjects. Bob's bio includes 20 years at the University of Texas, ABC TV, and NASA. His clear and friendly style bri...

Tripp Lite PV375 PV 375W 12V DC to AC Portable Inverter with DC Auto Power Outlet $41.95 TRIPP LITE DC TO AC POWER INVERTER ( EXTERNAL ) - 12 V - 375 WATT - 2 OUTPUT CONNECTOR(S) Manufacturer : TRIPP LITE UPC : 037332119841...

Sunforce 39810 80-Watt High-Efficiency Polycrystalline Solar Panel with Sharp Module $499.95 High-efficiency polycrystalline cells are ideal for areas with high sun exposure. 12 Volt solar battery charger delivers 80 Watts for homes, boats, RVs and back-up power. Also designer for 12V battery charging and solar power stations, pumps, beacons, lighting equipment and more! Works in all weather conditions. Completely weather resistant. Requires 30 Amp controller Item# 336615 (sold separately...

Accell Sunbolts TYO-0100-152 Solar Wire, 12AWG, UL Cert., RoHS compliance 500ft / 152m $203.00 Electro beam cross-linked constructionInsulation and jacket constructed of XLPE 1125CRated: 600V DC and 36 ampsTemperature rated: -40°F/-40°C to 194°F/90°CUL certified and listedRoHS compliantBlack jacket500'...

Photovoltaic Design and Installation For Dummies (For Dummies (Math & Science)) $13.50 The fun and easy way to get a grip on photovoltaic design and installationDesigning and installing solar panel systems is a trend that continues to grow. With 'green collar' jobs on the rise and homeowners looking for earth-friendly ways to stretch their dollars and lesson their carbon imprint, understanding photovoltaic design and installation is on the rise.Photovoltaic Design & Installation For...

Photovoltaics: Design and Installation Manual $29.00 Producing electricity from the sun using photovoltaic (PV) systems has become a major industry worldwide. But designing, installing and maintaining such systems requires knowledge and training, and there have been few easily accessible, comprehensive guides to the subject.Now, with Photovoltaics: Design and Installation Manual, a world-class solar energy training and education provider—Solar ...

Photovoltaic Systems $80.00 Demand for renewable-energy technologies is growing rapidly, requiring a greater number of skilled system technicians. Photovoltaic Systems is a comprehensive guide to the design and installation of several types of residential and commercial PV systems.The content covers the principles of PV electricity and how to effectively incorporate it into electrical systems. Numerous illustrations explain ...